chatgpt 语法入门 prompts and codewords

在最新的chatgpt里，我们已经有很多新的prompt（提示词）可以trigger ai并生成新的回答样式。

prompt：

when adding es8038 as the default codec for a cortex-a72 arm cpu in a linux system,what process must be done to enable the driver,the kernel and the software work well,give the detailed process in a command line

2，

prompt：

what is the definitions for "dts dtsi dtbo dtb",and list them in a table.

3，

prompt：

take raspberry pi 4b for example ,and rewrite the process

4，

when does the cpu process "board.dtb" in a full booting process,before the kernel boot,or before the rootfs image booting ,or before the u-boot booting?

list them in a table

4，list the process into a flowchart.

5，list the process into a diagram.

总结：prompt支持markdown语法，并且支持基本的flow chart相关术语，甚至是状态机，线性流程，可以复制到对应的项目管理软件打开，直接生成流程图等。

那么，chatgpt并不能完全替代你对未知项目功能的学习，比如，用蓝牙举例，如果你不知道具体的command名字，你就不能够让chatgpt给你一个精确的流程回复。

如果你给了准确的prompts，就能得到

in an actual test,i find out that the step"trust <MAC address>" should be done before " pair <MAC address> ", if not ,it will not pair successfully, please now rewrite the step-by-step proces with my words

Sure, here are the updated step-by-step instructions based on your findings:

1. Open a terminal window on your computer.

2. Type bluetoothctl and press Enter to start the Bluetooth control utility.

3. Type power on and press Enter to turn on Bluetooth on your computer (if it's not already on).

4. Type agent on and press Enter to enable the Bluetooth agent.

5. Type scan on and press Enter to start scanning for nearby Bluetooth devices.

6. Wait for the Bluetooth device you want to pair with to appear in the list of discovered devices. Note down its MAC address (e.g., "12:34:56:78:90:AB").

7. Type scan off and press Enter to stop scanning for Bluetooth devices.

8. Type trust <MAC address> (replacing <MAC address> with the MAC address of the device you want to pair with) and press Enter to mark the device as trusted.

9. Type pair <MAC address> (replacing <MAC address> with the MAC address of the device you want to pair with) and press Enter.

10. Follow the on-screen prompts to complete the pairing process. You may be asked to enter a PIN or confirm a passcode on both the computer and the Bluetooth device to establish a secure connection.

11. Finally, type exit and press Enter to exit the bluetoothctl utility.